PF >0.99
2-25th Order Harmonics
Switching Frequency 80kHz
View Manual
iKonMac Static Var Generator is a next-generation power quality solution for dynamic and precise reactive power compensation. It monitors system power factor and injects leading or lagging reactive current in real time.
Compared with traditional capacitor banks, SVG uses power electronic control to provide fast response, fine control and bidirectional compensation. It is suitable for power factor correction, voltage stabilization and load imbalance improvement.
Improve Power Factor to 0.99
Reactive Power Compensation 2-25th Order
Enhance Power System Stability
Reduce Losses & Voltage Fluctuations
Optimize Equipment Utilization & Lower Investment
Enable Energy Conservation & Cost Savings
The design features a layered structure, separating the electronic and power components. The electronic layer ensures insulation, moisture and dust protection, while the power layer is fan-cooled for harsh industrial environments.
Seventh generation Infineon IGBT technology reduces switching loss and supports high switching frequency with fast PWM calculation.
The control system uses FPGA architecture with parallel-running hardware CPU units, improving dynamic compensation calculation.
Optimized reactor design and high switching frequency reduce fan and switching noise for stable industrial operation.
Lower switching loss and compact inductance size help the cabinet maintain efficient continuous operation.
Layered heat dissipation and high temperature resistant components support operation in demanding industrial sites.
Intelligent startup and protection logic reduce resonance risk when working with complex loads and existing capacitor equipment.
Standard modular design supports compact cabinet integration for high-density AHF or SVG capacity in large industrial projects.
| Voltage Level (+-20%) | 220V / 400V / 480V / 690V / 800V |
|---|---|
| Module Capacity | SVG (kVar): 30 / 40 / 50 / 80 / 100 / 130 / 150 |
| Module Size (W*H*D) | 480*130*440: 30(kVar) 480*200*530: 50(kVar) 680*200*530: 50/100/150(kVar) 680*200*550: 40/50/80/100/135(kVar) |
| Maximum Capacity of Single Cabinet | 600kVar |
| Number of Parallels | 12 |
| Operating Frequency | 50Hz / 60Hz (-10% ~ +10%) |
| Current Transformer | 100 : 5 ~ 10000 : 5 |
| Controller | 100% Full FPGA, 16 CPUs parallel computation |
| Compensate For Harmonics | SVG: 2-25th |
| Efficiency | >97.5% |
| Compensates for Reactive Power | -1~+1 adjustable |
| Compensates for Three-Phase Imbalance | Imbalance is 100% fully compensated (690V no compensation for three-phase unbalance function) |
| Switching Frequency | 80kHz (7th Generation Infineon IGBT) |
| Methods of Communication | RS485, Modbus RTU, Wifi (Remote control) |
| Host Computer Software | Yes, all parameters can be set by the host computer |
| Fault Alarm | Yes, up to 500 alarm messages can be recorded |
| Monitor | 4.3" / 7" / 10" / 12" (Optional) Support independent monitoring of each module / centralized monitoring of the whole machine |
| Full Response Time | <=5ms, instant response <50us |
| Active Loss | <=2.5% |
| Heat Dissipation | Intelligent air cooling |
| Noise | <=60dB |
| Protection Features | There are more than 20 kinds of protection such as overvoltage, undervoltage, overheating, overcurrent, short circuit, etc |
| CT Installation Location | Load side / grid side optional |
| Wall Mount Size | The wall mount is the same size as the module |
| Module Weight | 17.5kg (30k); 26kg (480W50k); 32kg (680W50k); 38.5kg (680W100k); 45.5kg (150k) |
| Operating Temperature | -20C ~ +55C |
| Elevation | <5000 meters (More than 1000 meters, for every 100 meters of additional elevation, the power is reduced by 1%) |
| Relative Humidity | <95%, no condensation |
| Ingress Protection | Module IP20 + Electronic Layer IP42 (Customizable IP54 or IP65) |
| Pollution Resistance Rating | Level 2 (Customizable Level 3) |
iKonMac Static Var Generator (SVG) delivers dynamic reactive power compensation and power factor correction for industrial facilities with fluctuating loads.
The SVG monitors power factor and injects leading or lagging reactive current in real time, improving voltage stability and reducing energy loss.
Tell us your load profile, transformer capacity, target power factor or THDi requirement. Our engineering team will help evaluate suitable AHF/SVG configuration.
