Reactive Power Compensation
3kV-35kV
STATCOM Solution
View Manual
iKonMac High Voltage Static Var Generator provides fast, dynamic reactive power compensation and voltage support for medium and high-voltage power systems.
The system is suitable for utility, railway, metallurgy, mining and other large industrial projects where voltage fluctuation, low power factor and reactive power impact production stability.
Reactive Power Compensation
3kV-35kV Voltage Level
STATCOM Solution
Improve Voltage Stability
Dynamic Reactive Power Control
Custom Engineering Support
The design features a layered structure, separating the electronic and power components. The electronic layer ensures insulation, moisture and dust protection, while the power layer is fan-cooled for harsh industrial environments.
Seventh generation Infineon IGBT technology reduces switching loss and supports high switching frequency with fast PWM calculation.
The control system uses FPGA architecture with parallel-running hardware CPU units, improving dynamic compensation calculation.
Optimized reactor design and high switching frequency reduce fan and switching noise for stable industrial operation.
Lower switching loss and compact inductance size help the cabinet maintain efficient continuous operation.
Layered heat dissipation and high temperature resistant components support operation in demanding industrial sites.
Intelligent startup and protection logic reduce resonance risk when working with complex loads and existing capacitor equipment.
Standard modular design supports compact cabinet integration for high-density AHF or SVG capacity in large industrial projects.
| Rated Output Voltage | 3kV / 6kV / 10kV / 20kV / 22kV / 24kV / 33kV / 35kV |
|---|---|
| Rated Capacity | -150Mvar ~ +150MVar |
| Main Circuit | Three-phase 3kV, 6kV, 10kV, 20kV, 35kV |
| Control Circuit | DC220V, AC380V |
| Allowable Power Fluctuations | <=20% |
| Functions | Meet the standards of IEEE Std 519-1992, GB/T 14549-93 |
| Control Mode | Fixed reactive power, fixed voltage, fixed power factor, comprehensive control of voltage / power factor |
| Control Chip | DSP + FPGA |
| Operating Frequency | 50Hz / 60Hz |
| Response Time | <=5ms |
| Unit DC Voltage Control | Stable unit DC busbar control ensures normal operation of the device |
| Carrier Phase Shifting | Eliminate or reduce output harmonics |
| Subsidiary Functions | Fault recording, harmonic current compensation, negative sequence current compensation, etc |
| Run/Stop Setting | Touch screen, DCS control, upper communication |
| Upper Communication | RS485, Ethernet, Optical Fibre, RS232, 4G |
| Protection Function | Overcurrent, quick break, overvoltage, instantaneous drop, cooling fan failure, power unit failure, PT disconnection, unit overvoltage, system voltage abnormality, input voltage imbalance |
| Display/Operation | Local: Touch screen, cabinet door buttons, etc Remote: SCADA, AVC, etc |
| Cooling Mode | Forced air-cooled, liquid-cooled, air conditioning internal circulation, air liquid cooled |
| Protection Level | >=IP30 |
| Ambient Temperature | -10C ~ +40C |
| Storage/Transportation Temperature | -40C ~ +85C |
| Ambient Humidity | <=95%, no condensation |
| Application Environment | Below altitude of 2000 meters, there are no corrosive gases, flammable gases or salt spray; customization is required for environments above 2000 meters or for special use |
High Voltage Static Var Generator is a STATCOM-based reactive power compensation solution for medium and high-voltage systems.
It is used in utility, railway, metallurgy, mining and heavy industrial applications where voltage stability and dynamic reactive power control are critical.
Tell us your load profile, transformer capacity, target power factor or THDi requirement. Our engineering team will help evaluate suitable AHF/SVG configuration.
